Product View

See larger image and other views (with zoom)

Product Screenshots

Features

• Provides a professional 100 level shock and 100 level Vibration with Rechargeable LCD digital remote control electric training Collar
• Rechargeable LCD digital remote control electric training collar remote control electric shock devices
• Convenience of easy-to-read LCD screen shows the stimulation level. Over 3,000 different identity codes to prevent conflicts with other e-collars.
• The system can be used for 1 or 2 receivers.(the additional receiver must be the same type as your previous one and purchased from us)
• Note: Saving beads switch inside will ring if you shake the receiver.

Description

1. 100 levels of vibration & static.
2. The levels can be altered by use of up & down button.
3. This product is for pet training only , by training,the pet can understand the intention of its owner.Desirable results can only be achieved after a period of training.

Following the correct operation instructions,you can effectively train your pet and make it a docile and adorable creature.

How to Use the Transmitter

1.To turn on/off the Transmitter,Press the mode button on the Transmitter for 5 seconds.
2.By pressing the Mode button to change to different modes — -the LCD images will change.
3.Press the up and down buttons on right hand side to set level. 4.Choose the different channels for different receivers.
5. The Transmitter will go into STANDBY MODE if not operated for 20 seconds and will TURN OFF if not operated for 2 minutes.
6.In STANDBY MODE, press any button (except LED light button) to wake it up.

Connect the Transmitter with the Collar Receiver

1. Turn on the Transmitter and choose 1or 2 channels to encode.
2. Lift the Reset part of the Rubber cover in the Collar Receiver.
3. Use a toothpick or paper click to insert into the Reset HOLE inside the Collar Receiver.
4. Press the LAUNCH button on the Transmitter immediately while you are hearing a beep from the collar.
5. The Collar Receiver will beep , it means that the Transmitter has encoded the collar.
6. After completion, put the rubber cover in the right position to keep the internal unit from dust and water.

Package Includes:
1 x remote control unit
1 x collar
1 x charger&cord
1 x test light&replacement probes
1 x Operating Instructions

Trademark AGPtek products